Phil,
there is way to read ambient data from MODBUS or S7 server for now. Please open an issue
on the Artisan tracker on Github. However, there are no guarantees that this will be added
considering the low resource the project has right now. In the ideal case, submit a PR
with the required changes.
Best,
Marko
On 12. Oct 2019, at 16:33, Phil West via Artisan-User
<artisan-user(a)lists.einfachkaffee.de> wrote:
Hi:
I've put together a little Raspberry Pi Zero W Modbus TCP server that I'm using
over WiFi to provide thermocouple temps back to Artisan and to accept %PWR commands (from
a power slider) from Artisan to control my PWM heater. This is all working great with a 2
HZ refresh rate!
In addition to the TC and PWM devices on my R-Pi, I also have an ambient temp and
humidity sensor that I'd like to use to fill in the Roast Properties -> Ambient
Conditions fields. I cant figure out how to pipe a Modbus register (or two) into that.
When I look at Config->Device->Ambient, all I see for options are Phidget and Yocto.
Is there some way to get a modbus device/register to show up here?
Thanks for any pointers or suggestions for setting this up,
Phil
_______________________________________________
Artisan-User mailing list -- artisan-user(a)lists.einfachkaffee.de
To unsubscribe send an email to artisan-user-leave(a)lists.einfachkaffee.de
unsubscribe via
https://mailman.ghostdub.de/postorius/lists/artisan-user.lists.einfachkaffe…