Dear Artisan user group;
I have received an error I have not seen before using a Mac with the latest solfware : Sierra with a 64 bit system.
We have installed the CP210 driver with our data logger using Omron controls.
Here is a screen shot:
Modbus Error: Read float() hex() argument can't be converted to hex@line 30521
Could it be we have the wrong driver installed?
We use to use the FT232 driver but data driver was upgraded to a new model that has worked with the CP210 driver on most models (this data logger is setup for future use with Bluetooth capabilities)
Thank You;
Randy Harper
I'm relatively new to artisan. Been using RoastLogger for years but now that
I have my phidget 1048 I don't need the camera/ocr feature anymore.
I haven't been able to locate the help file or information about the
settings under Config-Device - Phidgets tab. For instance, Async check
boxes, raw data, change etc. I've found everything on the github page, but
maybe I just haven't been successful in pinpointing the proper area to look.
Secondly- I'm roasting on a Diedrich IR-24, which has a thicker J
thermocouple than the one I've hooked up to artisan, which is a K type 1/8in
I purchased here:
https://www.automationdirect.com/adc/Shopping/Catalog/Sensors_-z-_Encoders/T
emperature_Sensors_-a-_Transmitters/Thermocouple_Sensors/Probes_(with_Lead_W
ire_Transition)/THMK-T06L06-01
The temperatures are around 30 degrees F higher on the thinner K
thermocouple than what the roaster is reporting, even though my
thermocouples in the roaster are mounted next to each other (didn't want to
piggyback on BT of the roaster to phidgets)
Does anyone have any experience in this area? Perhaps the simple fact that
the probe is thinner means the readings will be different, but I do not
know. It would appear that the readings on the roaster are accurate while
the other is much hotter.
Just getting started, and appreciate any guidance.
First off, thanks for the info on the legend from last week.
Second, I have a problem that seems to happen every 4 or 5 roasts now.
After I hit drop, I have an alarm that stops the roast automatically (5 or 10 seconds later). Sometimes the roast log stops but it doesn't summarise and thus also count as a roast in the batch counter. So I have to save it and rename it to fit in chronological order of my logs. Naturally, not having the summary is a pain as well. The last two times I roasted I have had this happen.
Does it happen to anyone else?
Attached is a screenshot of what it says post roast
Thanks,,
Pear
mr.pear(a)me.com
(+34) 619 635 455
Hi there,
I understand we are able to choose where the legend should be in the graph…but is there a way to eliminate it all together. It is not needed after you have used it a few times and no matter where it is…it’s in the way, unless you try to create extra dead space.
Just a thought for flexibility.
Saludos,
Pear
mr.pear(a)me.com
(+34) 619 635 455
Thank you Dave,
I never noticed the blank space…maybe it could be labeled as such?
Saludos,
Pear
mr.pear(a)me.com
(+34) 619 635 455
> On 29 Jul 2019, at 17:56, artisan-user-request(a)lists.einfachkaffee.de wrote:
>
> Send Artisan-User mailing list submissions to
> artisan-user(a)lists.einfachkaffee.de
>
> To subscribe or unsubscribe via email, send a message with subject or
> body 'help' to
> artisan-user-request(a)lists.einfachkaffee.de
>
> You can reach the person managing the list at
> artisan-user-owner(a)lists.einfachkaffee.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Artisan-User digest..."
>
> Today's Topics:
>
> 1. Re: Legend (Dave)
> 2. Phase descriptors? (Dan Coplan)
> 3. Re: Phase descriptors? (Marko Luther)
> 4. generic scale (Napoleon Contreras)
>
>
> ----------------------------------------------------------------------
>
> Date: Wed, 24 Jul 2019 12:22:30 -0700
> From: Dave <roasterdave(a)gmx.com>
> Subject: [Artisan-user] Re: Legend
> To: artisan-user(a)lists.einfachkaffee.de
> Message-ID: <e9fe810d-bb6e-c6b7-4476-94e6df5a2b16(a)gmx.com>
> Content-Type: multipart/alternative;
> boundary="------------8D5A8B5C3697EA5EB7AD13FC"
>
> This is a multi-part message in MIME format.
> --------------8D5A8B5C3697EA5EB7AD13FC
> Content-Type: text/plain; charset=utf-8
> Content-Transfer-Encoding: quoted-printable
>
> Hi Pear,
>
> Go to Config>Axes and pick the blank entry in the Legend Location pull
> down.=C2=A0 That will hide the legend.
>
> Dave
>
> On 7/24/2019 12:16 PM, Pear . via Artisan-User wrote:
>> Hi there,
>>
>> I understand we are able to choose where the legend should be in the
>> graph=E2=80=A6but is there a way to eliminate it all together. It is not
>> needed after you have used it a few times and no matter where it
>> is=E2=80=A6it=E2=80=99s in the way, unless you try to create extra dead =
> space.
>>
>> Just a thought for flexibility.
>>
>> Saludos,
>> Pear
>> mr.pear(a)me.com <mailto:mr.pear@me.com>
>> (+34) 619 635 455
>>
>>
>> _______________________________________________
>> Artisan-User mailing list -- artisan-user(a)lists.einfachkaffee.de
>> To unsubscribe send an email to artisan-user-leave(a)lists.einfachkaffee.d=
> e
>> unsubscribe via https://mailman.ghostdub.de/postorius/lists/artisan-user=
> .lists.einfachkaffee.de/
>
>
> --------------8D5A8B5C3697EA5EB7AD13FC
> Content-Type: text/html; charset=utf-8
> Content-Transfer-Encoding: quoted-printable
>
> <html>
> <head>
> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DUTF-=
> 8">
> </head>
> <body text=3D"#000000" bgcolor=3D"#FFFFFF">
> Hi Pear,<br>
> <br>
> Go to Config>Axes and pick the blank entry in the Legend Location
> pull down.=C2=A0 That will hide the legend. <br>
> <br>
> Dave<br>
> <br>
> <div class=3D"moz-cite-prefix">On 7/24/2019 12:16 PM, Pear . via
> Artisan-User wrote:<br>
> </div>
> <blockquote type=3D"cite"
> cite=3D"mid:66160322-43A6-4798-9589-7644371A6943@me.com">
> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DUT=
> F-8">
> Hi there,
> <div class=3D""><br class=3D"">
> </div>
> <div class=3D"">I understand we are able to choose where the legend
> should be in the graph=E2=80=A6but is there a way to eliminate it =
> all
> together. It is not needed after you have used it a few times
> and no matter where it is=E2=80=A6it=E2=80=99s in the way, unless =
> you try to
> create extra dead space.</div>
> <div class=3D""><br class=3D"">
> </div>
> <div class=3D"">Just a thought for flexibility.<br class=3D"">
> <div class=3D"">
> <br class=3D"Apple-interchange-newline">
> <span style=3D"color: rgb(0, 0, 0); font-family: Helvetica;
> font-size: 12px; font-style: normal; font-variant-caps:
> normal; font-weight: normal; letter-spacing: normal;
> orphans: auto; text-align: start; text-indent: 0px;
> text-transform: none; white-space: normal; widows: auto;
> word-spacing: 0px; -webkit-text-size-adjust: auto;
> -webkit-text-stroke-width: 0px; display: inline !important;
> float: none;" class=3D"">Saludos,</span><br style=3D"color:
> rgb(0, 0, 0); font-family: Helvetica; font-size: 12px;
> font-style: normal; font-variant-caps: normal; font-weight:
> normal; letter-spacing: normal; orphans: auto; text-align:
> start; text-indent: 0px; text-transform: none; white-space:
> normal; widows: auto; word-spacing: 0px;
> -webkit-text-size-adjust: auto; -webkit-text-stroke-width:
> 0px;" class=3D"">
> <span style=3D"color: rgb(0, 0, 0); font-family: Helvetica;
> font-size: 12px; font-style: normal; font-variant-caps:
> normal; font-weight: normal; letter-spacing: normal;
> orphans: auto; text-align: start; text-indent: 0px;
> text-transform: none; white-space: normal; widows: auto;
> word-spacing: 0px; -webkit-text-size-adjust: auto;
> -webkit-text-stroke-width: 0px; display: inline !important;
> float: none;" class=3D"">Pear</span><br style=3D"color: rgb(0,
> 0, 0); font-family: Helvetica; font-size: 12px; font-style:
> normal; font-variant-caps: normal; font-weight: normal;
> letter-spacing: normal; orphans: auto; text-align: start;
> text-indent: 0px; text-transform: none; white-space: normal;
> widows: auto; word-spacing: 0px; -webkit-text-size-adjust:
> auto; -webkit-text-stroke-width: 0px;" class=3D"">
> <span style=3D"color: rgb(0, 0, 0); font-family: Helvetica;
> font-size: 12px; font-style: normal; font-variant-caps:
> normal; font-weight: normal; letter-spacing: normal;
> orphans: auto; text-align: start; text-indent: 0px;
> text-transform: none; white-space: normal; widows: auto;
> word-spacing: 0px; -webkit-text-size-adjust: auto;
> -webkit-text-stroke-width: 0px; display: inline !important;
> float: none;" class=3D""><a href=3D"mailto:mr.pear@me.com"
> class=3D"" moz-do-not-send=3D"true">mr.pear(a)me.com</a></span=
>> <br
> style=3D"color: rgb(0, 0, 0); font-family: Helvetica;
> font-size: 12px; font-style: normal; font-variant-caps:
> normal; font-weight: normal; letter-spacing: normal;
> orphans: auto; text-align: start; text-indent: 0px;
> text-transform: none; white-space: normal; widows: auto;
> word-spacing: 0px; -webkit-text-size-adjust: auto;
> -webkit-text-stroke-width: 0px;" class=3D"">
> <span style=3D"color: rgb(0, 0, 0); font-family: Helvetica;
> font-size: 12px; font-style: normal; font-variant-caps:
> normal; font-weight: normal; letter-spacing: normal;
> orphans: auto; text-align: start; text-indent: 0px;
> text-transform: none; white-space: normal; widows: auto;
> word-spacing: 0px; -webkit-text-size-adjust: auto;
> -webkit-text-stroke-width: 0px; display: inline !important;
> float: none;" class=3D"">(+34) 619 635 455</span>
> </div>
> <br class=3D"">
> </div>
> <br>
> <fieldset class=3D"mimeAttachmentHeader"></fieldset>
> <pre class=3D"moz-quote-pre" wrap=3D"">_____________________________=
> __________________
> Artisan-User mailing list -- <a class=3D"moz-txt-link-abbreviated" href=3D=
> "mailto:artisan-user@lists.einfachkaffee.de">artisan-user(a)lists.einfachkaf=
> fee.de</a>
> To unsubscribe send an email to <a class=3D"moz-txt-link-abbreviated" href=
> =3D"mailto:artisan-user-leave@lists.einfachkaffee.de">artisan-user-leave@l=
> ists.einfachkaffee.de</a>
> unsubscribe via <a class=3D"moz-txt-link-freetext" href=3D"https://mailman=
> .ghostdub.de/postorius/lists/artisan-user.lists.einfachkaffee.de/">https:/=
> /mailman.ghostdub.de/postorius/lists/artisan-user.lists.einfachkaffee.de/<=
> /a>
> </pre>
> </blockquote>
> <br>
> </body>
> </html>
>
> --------------8D5A8B5C3697EA5EB7AD13FC--
>
> ------------------------------
>
> Date: Sun, 28 Jul 2019 22:50:43 -0700
> From: Dan Coplan <dan(a)fatrabbitcoffee.com>
> Subject: [Artisan-user] Phase descriptors?
> To: "artisan-user(a)lists.einfachkaffee.de"
> <artisan-user(a)lists.einfachkaffee.de>
> Message-ID: <71585302-05D3-44EF-B509-18DFA368466C(a)fatrabbitcoffee.com>
> Content-Type: multipart/alternative;
> boundary="Apple-Mail=_D5317E40-D7F8-4FB2-AF68-76CDF48CC30F"
>
>
> --Apple-Mail=_D5317E40-D7F8-4FB2-AF68-76CDF48CC30F
> Content-Transfer-Encoding: quoted-printable
> Content-Type: text/plain;
> charset=utf-8
>
> Regarding the notes that indicate how each phase can be described (ex: =
> OK, Toasty, Acidic).
>
> I would like to know the list of descriptors for each phase and what the =
> range is. I=E2=80=99ve looked for this but can=E2=80=99t find it.
>
> For example, I have one roast that says =E2=80=9COK/Leathery=E2=80=9D =
> for the drying phase and another that just says =E2=80=9COK=E2=80=9D. I =
> can see that the one that is OK and not leathery received a higher =
> charge temp but I=E2=80=99m interested in knowing the limits for all =
> these as well as the theory behind why these descriptors were chosen (if =
> that=E2=80=99s not too involved).
>
> Is this something that=E2=80=99s baked into the programming or can I =
> customize it? Not that I would but just curious.
>
> Dan
>
> Fat Rabbit Coffee
> dan(a)fatrabbitcoffee.com <mailto:dan@fatrabbitcoffee.com>
> www.fatrabbitcoffee.com <http://www.fatrabbitcoffee.com/>=
>
> --Apple-Mail=_D5317E40-D7F8-4FB2-AF68-76CDF48CC30F
> Content-Transfer-Encoding: quoted-printable
> Content-Type: text/html;
> charset=utf-8
>
> <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; =
> charset=3Dutf-8"></head><body style=3D"word-wrap: break-word; =
> -webkit-nbsp-mode: space; line-break: after-white-space;" =
> class=3D"">Regarding the notes that indicate how each phase can be =
> described (ex: OK, Toasty, Acidic).<div class=3D""><br =
> class=3D""></div><div class=3D"">I would like to know the list of =
> descriptors for each phase and what the range is. I=E2=80=99ve looked =
> for this but can=E2=80=99t find it.</div><div class=3D""><br =
> class=3D""></div><div class=3D"">For example, I have one roast that says =
> =E2=80=9COK/Leathery=E2=80=9D for the drying phase and another that just =
> says =E2=80=9COK=E2=80=9D. I can see that the one that is OK and not =
> leathery received a higher charge temp but I=E2=80=99m interested in =
> knowing the limits for all these as well as the theory behind why these =
> descriptors were chosen (if that=E2=80=99s not too involved).</div><div =
> class=3D""><br class=3D""></div><div class=3D"">Is this something =
> that=E2=80=99s baked into the programming or can I customize it? Not =
> that I would but just curious.</div><div class=3D""><br =
> class=3D""></div><div class=3D"">Dan<br class=3D""><div class=3D"">
> <div style=3D"color: rgb(0, 0, 0); font-family: Helvetica; font-size: =
> 12px; font-style: normal; font-variant: normal; font-weight: normal; =
> letter-spacing: normal; line-height: normal; orphans: auto; text-align: =
> start; text-indent: 0px; text-transform: none; white-space: normal; =
> widows: auto; word-spacing: 0px; -webkit-text-stroke-width: 0px;" =
> class=3D""><div style=3D"margin: 0in 0in 0.0001pt; font-size: 12pt; =
> font-family: 'Times New Roman', serif;" class=3D""><b class=3D""><span =
> style=3D"font-size: 9pt; font-family: Helvetica, sans-serif;" =
> class=3D""><br class=3D"Apple-interchange-newline">Fat Rabbit =
> Coffee</span></b><span style=3D"font-size: 9pt; font-family: Helvetica, =
> sans-serif;" class=3D""><o:p class=3D""></o:p></span></div></div><div =
> style=3D"color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; =
> font-style: normal; font-variant: normal; font-weight: normal; =
> letter-spacing: normal; line-height: normal; orphans: auto; text-align: =
> start; text-indent: 0px; text-transform: none; white-space: normal; =
> widows: auto; word-spacing: 0px; -webkit-text-stroke-width: 0px;" =
> class=3D""><div style=3D"margin: 0in 0in 0.0001pt; font-size: 12pt; =
> font-family: 'Times New Roman', serif;" class=3D""><span =
> style=3D"font-size: 9pt; font-family: Helvetica, sans-serif;" =
> class=3D""><a href=3D"mailto:dan@fatrabbitcoffee.com" style=3D"color: =
> purple;" class=3D"">dan(a)fatrabbitcoffee.com</a><o:p =
> class=3D""></o:p></span></div></div><div style=3D"color: rgb(0, 0, 0); =
> font-family: Helvetica; font-size: 12px; font-style: normal; =
> font-variant: normal; font-weight: normal; letter-spacing: normal; =
> line-height: normal; orphans: auto; text-align: start; text-indent: 0px; =
> text-transform: none; white-space: normal; widows: auto; word-spacing: =
> 0px; -webkit-text-stroke-width: 0px;" class=3D""><div style=3D"margin: =
> 0in 0in 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', =
> serif;" class=3D""><span style=3D"font-size: 9pt; font-family: =
> Helvetica, sans-serif;" class=3D""><a =
> href=3D"http://www.fatrabbitcoffee.com" style=3D"color: purple;" =
> class=3D"">www.fatrabbitcoffee.com</a></span></div></div></div></div></bod=
> y></html>=
>
> --Apple-Mail=_D5317E40-D7F8-4FB2-AF68-76CDF48CC30F--
>
> ------------------------------
>
> Date: Mon, 29 Jul 2019 08:29:07 +0200
> From: Marko Luther <marko.luther(a)gmx.net>
> Subject: [Artisan-user] Re: Phase descriptors?
> To: Dan Coplan <dan(a)fatrabbitcoffee.com>
> Cc: "artisan-user(a)lists.einfachkaffee.de"
> <artisan-user(a)lists.einfachkaffee.de>
> Message-ID: <465AB92A-4BE9-4B74-9755-F9FA9EE678A1(a)gmx.net>
> Content-Type: text/plain; charset=utf-8
>
>
>
>> On 29. Jul 2019, at 07:50, Dan Coplan via Artisan-User <artisan-user(a)lists.einfachkaffee.de> wrote:
>>
>> Regarding the notes that indicate how each phase can be described (ex: OK, Toasty, Acidic).
>>
>> I would like to know the list of descriptors for each phase and what the range is. I’ve looked for this but can’t find it.
>>
>> For example, I have one roast that says “OK/Leathery” for the drying phase and another that just says “OK”. I can see that the one that is OK and not leathery received a higher charge temp but I’m interested in knowing the limits for all these as well as the theory behind why these descriptors were chosen (if that’s not too involved).
>>
>> Is this something that’s baked into the programming or can I customize it? Not that I would but just curious.
>
> Baked in and to be removed. Those descriptors where coined by Jim on HB many years ago and interpret absolute phases length. "OK/Leathery" indicates an evaluation on the border between OK and Leathery.
>
> http://www.home-barista.com/home-roasting/roasting-techniques-to-emphasize-…
>
> M
>
>>
>> Dan
>>
>> Fat Rabbit Coffee
>> dan(a)fatrabbitcoffee.com
>> www.fatrabbitcoffee.com
>> _______________________________________________
>> Artisan-User mailing list -- artisan-user(a)lists.einfachkaffee.de
>> To unsubscribe send an email to artisan-user-leave(a)lists.einfachkaffee.de
>> unsubscribe via https://mailman.ghostdub.de/postorius/lists/artisan-user.lists.einfachkaffe…
>
> ------------------------------
>
> Date: Mon, 29 Jul 2019 10:56:21 -0500
> From: Napoleon Contreras <contreras.napoleon(a)gmail.com>
> Subject: [Artisan-user] generic scale
> To: artisan-user(a)lists.einfachkaffee.de
> Message-ID:
> <CAE6mAt0zYRcj=xihjxFr5HP8ziVFV-THjJyeaEn69kFaX5ik2Q(a)mail.gmail.com>
> Content-Type: multipart/alternative;
> boundary="000000000000a36551058ed3ef0c"
>
> --000000000000a36551058ed3ef0c
> Content-Type: text/plain; charset="UTF-8"
>
> Hi, how can I connect and configure a generic scale to Artisan ?
>
>
>
>
> [image: Mailtrack]
> <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=sig…>
> Remitente
> notificado con
> Mailtrack
> <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=sig…>
> 29/07/19
> 10:55:17
>
> --000000000000a36551058ed3ef0c
> Content-Type: text/html; charset="UTF-8"
> Content-Transfer-Encoding: quoted-printable
>
> <div dir=3D"ltr"><div class=3D"gmail_default" style=3D"font-family:arial,he=
> lvetica,sans-serif;font-size:small"><br class=3D"gmail-Apple-interchange-ne=
> wline"><span style=3D"font-family:arial,sans-serif;font-size:16px;white-spa=
> ce:pre-wrap;background-color:rgb(248,249,250)">Hi, how can I connect and co=
> nfigure a generic scale to Artisan ?</span></div><div class=3D"gmail_defaul=
> t" style=3D"font-family:arial,helvetica,sans-serif;font-size:small"><br></d=
> iv><div class=3D"gmail_default" style=3D"font-family:arial,helvetica,sans-s=
> erif;font-size:small"><br></div><div class=3D"gmail_default" style=3D"font-=
> family:arial,helvetica,sans-serif;font-size:small">=C2=A0=C2=A0<br></div><b=
> r><div class=3D"mt-signature">
> <table border=3D"0" cellpadding=3D"8" cellspacing=3D"0" style=3D"us=
> er-select: none;">
> <tbody><tr>
> <td>
> <a href=3D"https://mailtrack.io?utm_source=3Dgmail&=
> utm_medium=3Dsignature&utm_campaign=3Dsignaturevirality5&" class=3D=
> "" style=3D"text-decoration:none">
> <img src=3D"https://s3.amazonaws.com/mailtrack-sign=
> ature/sender_notified.gif" alt=3D"Mailtrack" class=3D"" width=3D"32" height=
> =3D"32">
> </a>
> </td>
> <td>
> <span style=3D"color:#777">Remitente notificado con</sp=
> an> <br>
> <a href=3D"https://mailtrack.io?utm_source=3Dgmail&=
> utm_medium=3Dsignature&utm_campaign=3Dsignaturevirality5&" class=3D=
> "mt-install" style=3D"color:#4374f7">Mailtrack</a>
> <span style=3D"color:transparent;font-size:0">29/07/19 =
> 10:55:17</span>
> </td>
> <td>
> =20
> </td>
> </tr>
> </tbody></table>
> </div><img width=3D"0" height=3D"0" class=3D"mailtrack-img" alt=3D"" st=
> yle=3D"display:flex" src=3D"https://mailtrack.io/trace/mail/3c2b1d1c14fc236=
> 0b417b1cd9f0e62087cefd271.png?u=3D1286773"></div>
>
> --000000000000a36551058ed3ef0c--
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Artisan-User mailing list -- artisan-user(a)lists.einfachkaffee.de
> To unsubscribe send an email to artisan-user-leave(a)lists.einfachkaffee.de
> unsubscribe via https://mailman.ghostdub.de/postorius/lists/artisan-user.lists.einfachkaffe…
>
>
> ------------------------------
>
> End of Artisan-User Digest, Vol 94, Issue 10
> ********************************************
The buttons in V2 are nicer looking but the font is way smaller and really hard to read. Is there a way to increase the font size? If not this is a major request. Thank you.
Dan
Fat Rabbit Coffee
dan(a)fatrabbitcoffee.com <mailto:dan@fatrabbitcoffee.com>
www.fatrabbitcoffee.com <http://www.fatrabbitcoffee.com/>
Dear David,
you forgot the CC to the list.
> On 17. Jul 2019, at 05:14, David Kennedy <cityplusplus(a)yahoo.com> wrote:
>
> Hi Marko,
>
> If I make my own serial temperature sensor for BT & ET how do I configure Artisan to plot the data. Does artisan poll for temp data or accept a stream?
No Artisan is always polling connected instruments.
> How should the data be formatted for BT & ET?
Depends on the protocol used. You can connect your hardware either by implementing the TC4 aArtisan serial protocol (find the links here https://artisan-scope.org/devices/arduino/), implementing a MODBUS server and configure Artisan via the MODBUS tab to read data from the corresponding registers, or use a script that is called per interval and connects to your hardware and delivers the data (see under menu Config >> Device, 1st tab under "Extern Program" the documentation under "Help".
> What does menu>events>sampling>serial command do?
Sending out a command at every sampling interval. This is used for keep alive pings on some machines.
> What is a typical non-commercial donation in usd?
Take a loo here: https://artisan-scope.org/donate/
M
>
> Newbie
>
>
> Sent from Yahoo Mail for iPhone
>
> On Monday, July 15, 2019, 10:26 PM, Marko Luther <marko.luther(a)gmx.net> wrote:
>
> Dear Newbie,
>
>> On 16. Jul 2019, at 06:05, David Kennedy via Artisan-User <artisan-user(a)lists.einfachkaffee.de> wrote:
>>
>> How does it work?
>
> The Dummy device is returning 0 on both its channels.
>
>> Out going protocol?
>
> None
>
>> Incoming protocol?
>
> None
>
>> What is “Control” check box?
>
> https://artisan-roasterscope.blogspot.com/2016/11/pid-control.html
>
>> Where is it in source code?
>
> https://github.com/artisan-roaster-scope/artisan
>
>> Does Serial Log show its traffic?
>
> There is no traffic to show
>
> M
>
>
>>
>> Thank you.
>> Newbie
>>
>> Sent from Yahoo Mail for iPhone
>> _______________________________________________
>> Artisan-User mailing list -- artisan-user(a)lists.einfachkaffee.de
>> To unsubscribe send an email to artisan-user-leave(a)lists.einfachkaffee.de
>> unsubscribe via https://mailman.ghostdub.de/postorius/lists/artisan-user.lists.einfachkaffe…
How does it work? Out going protocol? Incoming protocol? What is “Control” check box? Where is it in source code? Does Serial Log show its traffic?
Thank you.Newbie
Sent from Yahoo Mail for iPhone
