The info you provide is very terse.
“SF6” is probably http://www.sanfranroaster.com/sf-6lb <http://www.sanfranroaster.com/sf-6lb>
And “Watlow" I assume to mean http://www.watlow.com/products/controllers/temperature.cfm <http://www.watlow.com/products/controllers/temperature.cfm>
My hunch is you maybe just connected the cables without making sure that variables like baud speed, even/uneven, parity, stopbits are all set exactly the same on both ends.
SF should be providing that info / assistance in their manuals / service desk.
Frans
> Op 29 sep. 2015, om 02:28 heeft Nate White <wcrcompany(a)gmail.com> het volgende geschreven:
>
> Which is Modbus Error: readfloat() Modbus Error: [connection] failed to connect [rtu baud[9600]] Aline 23885
>
> This is on an SF6 with Watlow. I'm sure this is a stupid question, my apologies.
>
> Nate
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
I've been using the Artisan program for some time now on an Ambex ym2 with
an Omega data logger and a 2 ghz dual core laptop. I just loaded 0.8 and
I'm hoping that I might get smoother ROR values with this version as I see
that is one of the improvements. Maybe the issue is the fast response of my
probes? Is there a way to compensate for this in Artisan? Can you make
some recommendations as to the EXTRA settings for the newer version and
maybe something up to date about the effects of using values too large or
too small? My ROR just jumps around too much and by the time it's
dropping/rising too rapidly it's almost too late for me to do anything about
it. Could I benefit (or not and why) from using over sampling or a higher
or lower sample rate? I'm at 4.0 now. Which curve smoothing values affect
real time displays and which don't? I've been reading Scott Rao's new book
and find myself evaluating my roasts and looking carefully at ROR and 1st to
drop percentages so Artisan is so useful. Thanks so much to all that have
contributed to this great program.
Fred
Seems to me like a bug. I'll take a look as soon as I find the time. It is on the list.
M
On 30.10.2015, at 16:45, Flint Orr wrote:
> Hi,
>
> Can someone who uses the linux version comment on this question.
>
> Under Tools --> Extras, I mark 'Humor' as the font, but the appearance of the text does not change. I found the .ttf file and installed it system wide. But no go with Artisan.
>
> Thanks!
>
> Flint
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
Hi,
Can someone who uses the linux version comment on this question.
Under Tools --> Extras, I mark 'Humor' as the font, but the appearance of
the text does not change. I found the .ttf file and installed it system
wide. But no go with Artisan.
Thanks!
Flint
Hi Dave,
this is a bug. I will investigate and fix this.
Thanks for reporting,
Marko
On 27.10.2015, at 11:44, Dave Stanton - Crankhouse Coffee wrote:
> Hi Marko,
>
> Just upgraded to 0.9.8 and I’m not seeing the Delta curves when I’m running the Print Report tool.
>
> Is there a flag I need to set to get these curves to appear on the print report ?
>
> Many thanks
> Dave
>
>
>
Hi there,
i am searching for a way to do calculations in extra devices and draw a
curve with BT minus storage temperature from green beans.
I know i can do the calculations in "extra devices" with the formula (Y2
- 16) where 16 is the actual Temperature in °C here for my cold beans.
But i have always go to "config/device/extra ..." and write the value
hard coded into the calculation.
Is there a variable available mybe for the "ambient conditions temp"
which is located in "roast properties"?
I can measure the beans and use Y4 but i want it as fixed value for the
specific beans i want to roast.
Thanks,
Manfred
I have tripped myself up a few times and spent way too much time trying
to get back to the beginning, so now I have to ask:
What do I need to know to keep the settings I want for Artisan from
getting re-set to the settings of someone else
if/as/when I upload their .alog file?
if/as/when I open their .aset file???
Do I need to have Artisan in more than one location on the computer?
One for me that I can keep the way I want it and one for everyone else
which will just keep changing?
I have had occasion to ask someone to send me their .alog or their .aset
file, and each time I have had to go back to square one and reset
everything the way I want it.
On Windows the 'Humor' font and xkcd style I like. On linux there does not
seem to be much of a difference.
Can I modify font selection further with linux?
Thanks!
Flint
Down loaded and reinstalled. It will run now.
Thank you very much,
Justin
On 22/10/15 22:40, Marko Luther wrote:
> Dear jwornes,
> thanks for reporting. There was an issue with the Linux build not
> setting a path to a shared lib correctly. That should be fixed by the
> new builds I just uploaded.
> Can you confirm?
> Best,
> Marko
> *Gesendet:* Donnerstag, 22. Oktober 2015 um 01:41 Uhr
> *Von:* jwornes <jwornes(a)hotmail.com>
> *An:* artisan-user(a)lists.einfachkaffee.de
> *Betreff:* Re: [Artisan-user] Artisan v0.9.8
> Installing this on to my Ubuntu system (14.04 LTS) has made it no
> longer work.
> I downloaded, installed via Ubuntu Software System. It came up with a
> crash screen after trying to run so I reinstalled. After that nothing
> happens and the crash screen no longer comes up.
> I redownloaded and reinstalled again via Ubuntu Software System with
> the same outcome, not starting.
> I did a system file search and found a file called
> 'update-notifier-crash-_var_crash__usr_share_artisan_artisan.1000.crash.log'.
> Opening in Text Editor I see this;
>
> Thu Oct 22 00:20:48 AEDT 2015 crash report
> /var/crash/_usr_share_artisan_artisan.1000.crash detected
> ERROR: Cannot update /var/crash/_usr_share_artisan_artisan.1000.crash:
> [Errno 13] Permission denied:
> '/var/crash/_usr_share_artisan_artisan.1000.crash'
> Thu Oct 22 00:21:13 AEDT 2015 crash report
> /var/crash/_usr_share_artisan_artisan.1000.crash detected
> Thu Oct 22 09:04:52 AEDT 2015 crash report
> /var/crash/_usr_share_artisan_artisan.1000.crash detected
>
>
> On 21/10/15 20:49, Marko Luther wrote:
>
> Dear all,
> The final 0.9.8 release is now online.
> https://github.com/MAKOMO/artisan/releases/latest
> Change log:
> https://github.com/artisan-roaster-scope/artisan/blob/master/wiki/ReleaseHi…
> Thanks to all who supported us on this with bug reports and ideas.
> Please keep them coming.
> Best,
> Marko & Rafael
>
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
>
>
> _______________________________________________ Artisan-User mailing
> list Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
