I don't know if it is at all possible or if it is alot of work but it occured to me that it would be nice if it was possible to have multiple roasts open in different tabs, just like most browsers work now. Of course only one would be active for logging an ongoing roast (I guess :-) ), the others would just be showing finished roasts. Pressing Ctrl-N would open a new tab and start the logging in that.
It would be useful for comparing profiles or just to go back to the previous roast to edit the properties/notes/etc while a new roast is in progress.
/Martin
Hi all.
These are some of changes and their explanations in artisan version 0.5.4
- adds events by value
Events by value draw faster than events by type. There is no penalty of performance when drawing more than 20 events by value or any other higher number. At the end of a roast, you could always convert/visualize to events type. It is just a mode. They are made in the same principle ans events by type but instead of using only 4 bars (four event types), events by value use 11 bars. Lowest bar is for no value. Then second lowest bar is for value 0, thrid lowest bar is for value 1, etc, up to value 10.
Events by value are configured in the menu Config/Events...
- adds custom event button palettes
A palette is a memory footprint of a button configuration. There are now 10 memory allocations to store button configurations (there are 10 palettes). Palettes allow categorization and unlimited expansion of of event buttons. Each palette can be accessed by using the keyboard shortcut numbers 0-9.
Let me give you an easy example. These steps show how to program 3 palettes of 3 different colors:
Go to Config/Events/Buttons:
Press button [B Defaults]. This button generates automatically 4 rows (from 4 event types) of buttons with a range of values from 0 to 10. Now you have created new buttons but they have to be saved in a palette if you want to have more than one configuration.
Then go to palette tab (third tab) and save buttons as palette #0 (you have made one palette #0)
Go back to tab Buttons (second tab). Enter number 190 in color pattern. Then go to palette tab and save buttons as palette #1 (you have made palette #1).
Go back to tab Buttons. Enter number 300 in color pattern. Then go to palette tab and save buttons as palette #2 (you have made palette #2).
In this example, you have saved/programed 3 palettes. Instead of just changing colors, you could have programmed the buttons for any other purpose or configuration.
Now close the Event Configuration Dialog.
Press keyboard [0],[1],[2] and see how the buttons change. (ie. pallete #0 is restored with the keyboard shortcut [0], etc)
There is also an option to save-restore the palettes to a text file in the third tab. For example, It could take some time to do all the work of programming the buttons, and then lose the work for some reason. For example if you ever had to do a Factory Reset (in the Help menu), then all the settings and all the palettes would be lost. With a text file, your time of hard work programming the buttons could be saved.
- adds virtual device from plot
There is a new button to add a virtual device from the Tools/Extras math plotter
- adds K204 CSV import
new import method
- improves Designer
Now it is easier to use Designer to create profiles from pen and paper. For example, you can record the main points of a roast with a pen, then transfer the data using Designer to create a profile.
- improves Statistics
One more option was added to hide/show the evaluations and other minor improvements.
- improves Help dialogs
New help dialogs were added to help in the development of artisan and to find bugs easier.
- improves relative times
In the Roast properties (and other places), you can edit the CHARGE time with more flexibility. This time is important because the other mark times are relative to it.
- adds axes Reset time.
Now you can tell artisan what max time you want to reset to after pressing Reset. Config/Axes menu.
- many bug fixes
The artisan Team.
Hi all,
despite the hurican just passing Raphael's house, we have uploaded Artisan v0.5.4 with the following changes:
- adds events by value
- adds custom event button palettes
- adds virtual device from plot
- adds K204 CSV import
- improves Designer
- improves Statistics
- improves Help dialogs
- improves relative times
- bug fixes
The artisan team
I'm still having this issue where a 2nd or 3rd roast using a background
causes the axis to display a large minus number and a larger positive number
like -17 min to 23 min. No amount of re-entering the axis values will change
it. The roast starts at the correct value, 0.0.
I think it has to do with the sequence I use to end a roast. I hit the end
button, save the roast, select new from the menu and then reset. I'm not
even sure what RESET is supposed to do or why I need to hit it. Is the
sequence wrong here? It really should not matter should it? I would really
like every roast to use the same max value for the x-axis but have to select
keep the last max or else it reverts to something silly like 0 to 1 minute.
I have a pic of the last roast with the x-axis if that helps. When I loaded
that roast it was -17 min to 36 min on the x-axis...pretty crazy.
Fred Bacher
-----Original Message-----
From: artisan-user-bounces(a)lists.einfachkaffee.de
[mailto:artisan-user-bounces@lists.einfachkaffee.de] On Behalf Of
artisan-user-request(a)lists.einfachkaffee.de
Sent: Wednesday, August 03, 2011 3:00 AM
To: artisan-user(a)lists.einfachkaffee.de
Subject: Artisan-User Digest, Vol 7, Issue 1
Send Artisan-User mailing list submissions to
artisan-user(a)lists.einfachkaffee.de
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.mokelbu.de/listinfo/artisan-user
or, via email, send a message with subject or body 'help' to
artisan-user-request(a)lists.einfachkaffee.de
You can reach the person managing the list at
artisan-user-owner(a)lists.einfachkaffee.de
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Artisan-User digest..."
Today's Topics:
1. Re: Artisan-User Digest, Vol 6, Issue 6
(Chris Pefanis (The Millery))
2. Re: Artisan-User Digest, Vol 6, Issue 6 (Marko Luther)
3. Re: Artisan-User Digest, Vol 6, Issue 6 (Marko Luther)
4. Re: Artisan-User Digest, Vol 6, Issue 6 (Marko Luther)
----------------------------------------------------------------------
Message: 1
Date: Tue, 2 Aug 2011 13:26:12 +0200
From: "Chris Pefanis (The Millery)" <chris.pefanis(a)gmail.com>
Subject: Re: [Artisan-user] Artisan-User Digest, Vol 6, Issue 6
To: artisan-user(a)lists.einfachkaffee.de
Message-ID: <74D3C5FE-FEAA-4DAB-80C6-9C38E54FFC45(a)gmail.com>
Content-Type: text/plain; charset=us-ascii
Hi There,
I upgraded to Artisan 0.5.3 for Mac toady, and found that after clicking
'On' and then 'Charge', the program freezes and I have to 'Force Quit'.
The previous Mac version seemed to work OK except for the >20 events issue
slowing down the operation to become unusable.
I use Mac OSX 10.6.4
Thank you for a fantastic program and all your efforts towards this! Much
appreciated!
Best Regards,
Chris Pefanis
<:: No trees were killed in the sending of this message, however a large
number of electrons were terribly inconvenienced ::>
On 31 Jul 2011, at 12:00 PM, artisan-user-request(a)lists.einfachkaffee.de
wrote:
> Send Artisan-User mailing list submissions to
> artisan-user(a)lists.einfachkaffee.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.mokelbu.de/listinfo/artisan-user
> or, via email, send a message with subject or body 'help' to
> artisan-user-request(a)lists.einfachkaffee.de
>
> You can reach the person managing the list at
> artisan-user-owner(a)lists.einfachkaffee.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Artisan-User digest..."
>
>
> Today's Topics:
>
> 1. version 0.5.3 released today (zb)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 30 Jul 2011 12:50:47 -0700 (PDT)
> From: zb <zauborg(a)yahoo.com>
> Subject: [Artisan-user] version 0.5.3 released today
> To: "artisan-user(a)lists.einfachkaffee.de"
> <artisan-user(a)lists.einfachkaffee.de>
> Message-ID:
> <1312055447.83407.YahooMailNeo(a)web121618.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi all.
>
> There's been a newer version of artisan released today with small changes.
>
> Changes:
>
> - improves performance of push buttons
> - adds device external-program
> - adds trouble shooting serial log
> - fixes Linux Ubuntu and other bugs
>
>
> The artisan team.
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> http://lists.mokelbu.de/pipermail/artisan-user/attachments/20110730/9e
> 466979/attachment.html
>
> ------------------------------
>
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
>
>
> End of Artisan-User Digest, Vol 6, Issue 6
> ******************************************
------------------------------
Message: 2
Date: Tue, 02 Aug 2011 14:08:53 +0200
From: "Marko Luther" <marko.luther(a)gmx.net>
Subject: Re: [Artisan-user] Artisan-User Digest, Vol 6, Issue 6
To: "Chris Pefanis (The Millery)" <chris.pefanis(a)gmail.com>,
artisan-user(a)lists.einfachkaffee.de
Message-ID: <20110802120853.66510(a)gmx.net>
Content-Type: text/plain; charset="utf-8"
Thanks for the report Chris. However, I cannot reproduce this. Could you
tell us more about your setup? Which device are you using?
There should not be a huge difference in behavior between 0.5.2 and 0.5.3 on
the Mac platform as this was mainly a Linux fix. Can you confirm that v0.5.2
worked for you without raising this issue?
Thanks,
M.
-------- Original-Nachricht --------
> Datum: Tue, 2 Aug 2011 13:26:12 +0200
> Von: "Chris Pefanis (The Millery)" <chris.pefanis(a)gmail.com>
> An: artisan-user(a)lists.einfachkaffee.de
> Betreff: Re: [Artisan-user] Artisan-User Digest, Vol 6, Issue 6
> Hi There,
>
> I upgraded to Artisan 0.5.3 for Mac toady, and found that after
> clicking 'On' and then 'Charge', the program freezes and I have to 'Force
Quit'.
>
> The previous Mac version seemed to work OK except for the >20 events
> issue slowing down the operation to become unusable.
>
> I use Mac OSX 10.6.4
>
> Thank you for a fantastic program and all your efforts towards this!
> Much appreciated!
>
> Best Regards,
> Chris Pefanis
>
>
>
>
> <:: No trees were killed in the sending of this message, however a
> large number of electrons were terribly inconvenienced ::>
>
> On 31 Jul 2011, at 12:00 PM,
> artisan-user-request(a)lists.einfachkaffee.de
> wrote:
>
> > Send Artisan-User mailing list submissions to
> > artisan-user(a)lists.einfachkaffee.de
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > https://lists.mokelbu.de/listinfo/artisan-user
> > or, via email, send a message with subject or body 'help' to
> > artisan-user-request(a)lists.einfachkaffee.de
> >
> > You can reach the person managing the list at
> > artisan-user-owner(a)lists.einfachkaffee.de
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Artisan-User digest..."
> >
> >
> > Today's Topics:
> >
> > 1. version 0.5.3 released today (zb)
> >
> >
> > --------------------------------------------------------------------
> > --
> >
> > Message: 1
> > Date: Sat, 30 Jul 2011 12:50:47 -0700 (PDT)
> > From: zb <zauborg(a)yahoo.com>
> > Subject: [Artisan-user] version 0.5.3 released today
> > To: "artisan-user(a)lists.einfachkaffee.de"
> > <artisan-user(a)lists.einfachkaffee.de>
> > Message-ID:
> > <1312055447.83407.YahooMailNeo(a)web121618.mail.ne1.yahoo.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Hi all.
> >
> > There's been a newer version of artisan released today with small
> changes.
> >
> > Changes:
> >
> > - improves performance of push buttons
> > - adds device external-program
> > - adds trouble shooting serial log
> > - fixes Linux Ubuntu and other bugs
> >
> >
> > The artisan team.
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL:
> http://lists.mokelbu.de/pipermail/artisan-user/attachments/20110730/9e
> 466979/attachment.html
> >
> > ------------------------------
> >
> > _______________________________________________
> > Artisan-User mailing list
> > Artisan-User(a)lists.einfachkaffee.de
> > https://lists.mokelbu.de/listinfo/artisan-user
> >
> >
> > End of Artisan-User Digest, Vol 6, Issue 6
> > ******************************************
>
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit
bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
------------------------------
Message: 3
Date: Tue, 2 Aug 2011 14:15:39 +0200
From: Marko Luther <marko.luther(a)gmx.net>
Subject: Re: [Artisan-user] Artisan-User Digest, Vol 6, Issue 6
To: "Chris Pefanis (The Millery)" <chris.pefanis(a)gmail.com>
Cc: "artisan-user(a)lists.einfachkaffee.de"
<artisan-user(a)lists.einfachkaffee.de>
Message-ID: <3C5BA434-C0DB-4BAF-AE46-FD492C657E35(a)gmx.net>
Content-Type: text/plain; charset=us-ascii
Chris could you also tell us which OS version an processor your Mac is
running?
M.
Sent from my iPhone
On 02.08.2011, at 13:26, "Chris Pefanis (The Millery)"
<chris.pefanis(a)gmail.com> wrote:
> Hi There,
>
> I upgraded to Artisan 0.5.3 for Mac toady, and found that after clicking
'On' and then 'Charge', the program freezes and I have to 'Force Quit'.
>
> The previous Mac version seemed to work OK except for the >20 events issue
slowing down the operation to become unusable.
>
> I use Mac OSX 10.6.4
>
> Thank you for a fantastic program and all your efforts towards this! Much
appreciated!
>
> Best Regards,
> Chris Pefanis
>
>
>
>
> <:: No trees were killed in the sending of this message,
> however a large number of electrons were terribly inconvenienced ::>
>
> On 31 Jul 2011, at 12:00 PM, artisan-user-request(a)lists.einfachkaffee.de
wrote:
>
>> Send Artisan-User mailing list submissions to
>> artisan-user(a)lists.einfachkaffee.de
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://lists.mokelbu.de/listinfo/artisan-user
>> or, via email, send a message with subject or body 'help' to
>> artisan-user-request(a)lists.einfachkaffee.de
>>
>> You can reach the person managing the list at
>> artisan-user-owner(a)lists.einfachkaffee.de
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Artisan-User digest..."
>>
>>
>> Today's Topics:
>>
>> 1. version 0.5.3 released today (zb)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sat, 30 Jul 2011 12:50:47 -0700 (PDT)
>> From: zb <zauborg(a)yahoo.com>
>> Subject: [Artisan-user] version 0.5.3 released today
>> To: "artisan-user(a)lists.einfachkaffee.de"
>> <artisan-user(a)lists.einfachkaffee.de>
>> Message-ID:
>> <1312055447.83407.YahooMailNeo(a)web121618.mail.ne1.yahoo.com>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> Hi all.
>>
>> There's been a newer version of artisan released today with small
changes.
>>
>> Changes:
>>
>> - improves performance of push buttons
>> - adds device external-program
>> - adds trouble shooting serial log
>> - fixes Linux Ubuntu and other bugs
>>
>>
>> The artisan team.
>>
Hi.
There is a +ArduinoTC4 as an extra devices option, but it has not been yet. So it at this time, you can only plot two values.
Cheers
________________________________
From: Lee McLaren <lists(a)lrm.com.au>
To: artisan-user(a)lists.einfachkaffee.de
Sent: Thursday, August 11, 2011 11:38 PM
Subject: [Artisan-user] Graph all 4 TC4 values
Hi,
I apologise in advance if I have missed the obvious.
Is it possible to graph all 4 values being sent by a TC4 at the same time?
I understand the additional devices option but I am unsure how you can use for example 3 and 4 from the same TC4 as you configured as the main device using 1 and 2 for ET and BT.
Thanks
Lee
_______________________________________________
Artisan-User mailing list
Artisan-User(a)lists.einfachkaffee.de
https://lists.mokelbu.de/listinfo/artisan-user
Hi,
I apologise in advance if I have missed the obvious.
Is it possible to graph all 4 values being sent by a TC4 at the same time?
I understand the additional devices option but I am unsure how you can use
for example 3 and 4 from the same TC4 as you configured as the main device
using 1 and 2 for ET and BT.
Thanks
Lee
Hi There,
I upgraded to Artisan 0.5.3 for Mac toady, and found that after clicking 'On' and then 'Charge', the program freezes and I have to 'Force Quit'.
The previous Mac version seemed to work OK except for the >20 events issue slowing down the operation to become unusable.
I use Mac OSX 10.6.4
Thank you for a fantastic program and all your efforts towards this! Much appreciated!
Best Regards,
Chris Pefanis
<:: No trees were killed in the sending of this message,
however a large number of electrons were terribly inconvenienced ::>
On 31 Jul 2011, at 12:00 PM, artisan-user-request(a)lists.einfachkaffee.de wrote:
> Send Artisan-User mailing list submissions to
> artisan-user(a)lists.einfachkaffee.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.mokelbu.de/listinfo/artisan-user
> or, via email, send a message with subject or body 'help' to
> artisan-user-request(a)lists.einfachkaffee.de
>
> You can reach the person managing the list at
> artisan-user-owner(a)lists.einfachkaffee.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Artisan-User digest..."
>
>
> Today's Topics:
>
> 1. version 0.5.3 released today (zb)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 30 Jul 2011 12:50:47 -0700 (PDT)
> From: zb <zauborg(a)yahoo.com>
> Subject: [Artisan-user] version 0.5.3 released today
> To: "artisan-user(a)lists.einfachkaffee.de"
> <artisan-user(a)lists.einfachkaffee.de>
> Message-ID:
> <1312055447.83407.YahooMailNeo(a)web121618.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi all.
>
> There's been a newer version of artisan released today with small changes.
>
> Changes:
>
> - improves performance of push buttons
> - adds device external-program
> - adds trouble shooting serial log
> - fixes Linux Ubuntu and other bugs
>
>
> The artisan team.
>